Covering your ass!®
The Blue Slim Fit Draggin’® Jeans have a straight leg boot cut with the traditional five pocket design. We also incorporate the change pocket on the left side for ease of use on your bike.
We use 14.5 ounce denim and a protective lining made with 13.5 ounce DuPont™ KEVLAR® fiber. The protective lining extends from just below the belt loops to, well, just below your ass. It extends vertically from hip seam to hip seam. We cover your knees as well with protection that wraps around to cover the front and outside of the knee and shin.
Each pair of Draggin’® Jeans is handmade in the USA! They are pre-washed and pre-shrunk. We cut our jeans true to size, so we recommend measuring a pair of your own jeans to get the right fit.
Available in Vintage Blue.
These seem well made and are definitely good looking. The stitching to hold the kevlar in place is gold. I would have preferred something that doesn't contrast with the jean material. The fit is the same as my 501's with a little bit higher waist and tighter calves. They flare out enough to go over my boots though. If they hold up well with wear, they'll be a major win. Unknown on 8th Dec 2016
This was my 8th or 9th pair of Draggin Jeans purchased over the last 15 years. The company has changed hands recently and I was skeptical due to some previous sizing issues. After speaking with a Draggin Jeans rep and getting an email from the new owner, I decided to give them a try. As a person that will not throw a leg over two wheels without the proper safety gear on, I appreciate having some protection from road rash in the case of a fall. I will be writing a full review on my blog, SafeOn2Wheels.com in the very near future. I have been down on two wheels three times and currently (knock on wood) have no scares to show. Draggin Jeans is partly credited for that. The new slim fit is exactly the fit for me. Kevlar reinforced Jeans are proven to protect from road rash when sliding on pavement as long as the correct fit is in place. For me the new Draggin Jeans are the safe answer for street riding pants and they are very stylish too. Unknown on 1st Dec 2016
These are very comfortable jeans. The measurements on web site are true to the jeans fit, although the "slim fit" fit more like classic Jeans. I purchased those based of my measurements and they fit well, usually purchase regular fit jeans.
Only downside is they didn't come in black. Joe on 9th Sep 2016
Draggin' Jeans are solidly constructed riding jeans made with heavyweight yet pliable denim and significant Kevlar protection. This is my third pair of Draggin' Jeans, and I decided to go with the slim fit (since I lost a few lbs.). The length and waist are cut true to size, unlike most other brands. The slim fit was quite tight on me at first, but after the jeans break-in they conform better to your body yet are still a slim fitting riding pant. I will wear these with my sports bike and save the classic fit jeans for cruiser riding. If you want a high quality protective riding pant, you can't go wrong with Draggin' Jeans. Chris on 24th Oct 2015
Jeans fit great and are very comfortable. The slim fit eliminates any bagginess but they still have plenty of room to move comfortably. The denim and kevlar reinforced sections feel very sturdy. AJ on 11th Aug 2015
I ordered these pants just before a flight out west to ride the Pacific NW and the Oregon coast. They got to me 30 minutes before I was to go to the airport. I'm so glad. The 32 slim fit me perfectly and we're super comfortable. They're so comfortable I t's hard to believe they are so protective. And for the money! I've paid more than that for ordinary jeans! Unknown on 5th Aug 2015
These are very comfortable jeans. The fit is good as is the quality. Denim is really nice. My waist measured 35 so I ordered a 36 which fit very well. The hip pads stick to the Kevlar with stick on velcro. I didn't think it would work but they actually do stay in place. I recommend using knee pads that have their own sleeve rather than attaching them to the pants, so they will not shift.
look good and fit good
a lot of Kevlar
Denim bunches up behind knees when riding.
the denim has been a little distressed with wrinkles showing in the dye. I don't need the factory to add wear to the jeans before I get them.
Even with boot cut, legs are too narrow to fit over my boots. Wish legs were cut narrower to fit better inside boots, or wider to fit over top.
Phil M on 10th May 2015
I'm 5'9, 160lb, and normally wear 32x30. I've found that every pair of motojeans out there is hideously baggy, so I though maybe Draggin's slim jeans would fit the way regular jeans should. This was not the case though; these things are tight. Not quite painted-on, but a chore to get into. The length was perfect, but the waist was pretty snug. I'll be exchanging them for a pair of Classics in the same measurements, which hopefully will do the trick.
For what it's worth, the quality seemed great while I had them on. The material looks good, too. Nice and dark. A good-looking pair of jeans at this price point. Elliott on 25th Mar 2015
I'm 5'11" and the 34/30 jeans fit well. They were a little snug in the waist , but stretch a little and end up comfortable. The legs are definitely slim fit and there is no way I could put in knee protection, but for the type of riding I do I feel secure. My wife is buying a pair, so they must be good. Sam on 9th Aug 2014
These are true to fit. 32W 32 L fit great and I feel secure while riding with. They not only fit well but look great. Most have no clue they are riding jeans. I wore these from Las vegas NV to Tombstone AZ over the Memorial weekend. I felt comfortable riding with them and then walking around all day. I am getting two more pair for sure. Siege on 30th May 2014